El  modelo del elemento finito como herramienta para la investigación en odontología.

Marcia Lorenzetti Cabal

doi:10.48204/2710-7825.6272

Submitted November 8, 2024

Published 2024-11-15

Artículos

Vol. 4 No. 2 (2024): Contacto Científico

The finite element model as a tool for dental research.

Marcia Lorenzetti Cabal ⁺⁻

DOI https://doi.org/10.48204/2710-7825.6272

PDF (Español (España))

References

DOI: 10.48204/2710-7825.6272

Published: 2024-11-15

How to Cite

Lorenzetti Cabal , M. (2024). The finite element model as a tool for dental research. Contacto Científico, 4(2), 39–44. https://doi.org/10.48204/2710-7825.6272

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Abstract

Finite element analysis or finite element modeling is a non-invasive but highly accurate investigative method that divides the object to be studied into smaller elements. It is a method that allows investigations to be carried out that would otherwise be very complex or very expensive. However, for the research to have an impact on the professional community, the researcher must detail the variables and must justify the assumptions of the research.

Downloads

Download data is not yet available.

References

Romanyk DL, Vafaeian B, Addison O, Adeeb S. The use of finite element analysis in dentistry and orthodontics: a critical points of model development and interpreting results. Semin Orthod 2020; 26:162.73.
Marya, A. David G, Eugenio M. Finite element analysis and its role in orthodontics. Adv Dent & Oral Health. 2(2):1-2
Mascarenhas R, Parveen S, Shenoy S, Kumar G.S. Infinite Applications of finite element method. J Ind Orthod Soc. Dec 2018;52(special issue):S142-S150
Lince, J. Modelo tridimensional en elementos finitos de un diente con perno y corona sometido a bruxismo. Tesis de grado para optar al título de Especialista en Prótesis periodontal. Universidad-CES. Medillin, Colombia. 2000.
Middleton J, Jones M, Wilson A. The role of the periodontal ligament in bone modeling: the initial development of a time-dependent finite element model. Am J Orthod Dentofacial Orthop 109(2): 155-162.
Farah JW, Craig RG, Sikarski DL. Photoelastic and finite element stress analysis of a restored axisymmetric first molar. J Biomech. 1973; 6:511-520.
Geng JP, Tan KB, Liu GR. Application of finite element analysis in implant dentistry; an review of the literature. J Prosthet dent. 2001;85(6):585-598.
Mohammed SD, Desai H. Basic concepts of finite element analysis and its applications in dentistry:An overview. Journal of Oral Hygiene & Health. 2014 Aug 14:1-5.
Mascarenhas R, Parveen S, Shenoy S, Kumar G.S. Infinite Applications of finite element method. J Ind Orthod Soc. Dec 2018;52(special issue):S142-S150
Szucs A, Bujtar P, Sandor Gk, Barabas J. Finite element análisis of the human mandible to assess the effect of removing an impacted third molar. J Can Dent Assoc. 2010;76(1):72.
Goel VK, Khera SC, Ralson JL, Chang KH. Stresses at the dentino-enamel junction of human teeth: A finite element investigation. J Prosthet Dent 1991; 66:451-459.
Lee MH, Versluis A, Kim BM, Lee Cj, Hur B, Kim HC. Correlation between experimental cyclic fatigue resistance and numerical stress analysis for nickel-titanium rotary files. J Endod. 2011;37(8):1152-1157.
Ding X, Zhu XH, Liao SH, Zhang XH, Chen H. Implant-bone interface stress distribution in immediately loaded implants of different diameters: a three-dimensional finite element analysis. J Prosthodont. 2009;18(5):393-402.
Moss M, Scalak R, Patel H, Sen K, Moss-Salentijn L, Shinozuka M, Am J Orthod. 1985;87(6) 453-472.
Bandela V, Kanaparthi S. Finite Element Analysis and Its applications in Dentistry. http://dx.doi.rog/10.5772/interchopen.94064.
Lagravere, M. Finite element analysis: Is it justifiable? Am J Orthod Dento Orthop 2021;159(3):255-256.